Cold work tool steel

Tool Steel O1 / 1.2510 / SKS3

Tool Steel O1 / 1.2510 / SKS3
Tool Steel O1 / 1.2510 / SKS3
Tool Steel O1 / 1.2510 / SKS3
Tool Steel O1 / 1.2510 / SKS3
Tool Steel O1 / 1.2510 / SKS3

Description

Reviews

DIN 1.2510 / AISI O1 / JIS SKS3 Cold Work Tool Steel

DIN 1.2510 / AISI O1 / JIS SKS3 Cold Work Tool Steel, its typical applications is making blanking, forming, and trim dies, gages, slitting cutters, punches, bolster dies, knock-out pins, thread roll dies, bending dies, plastic mold dies, shims, cams, machine ways, stamps, machine parts, jigs, cutter templates, swaging dies, etc.

Dimensions
Round: dia.10-500 mm
Flat: 6-120 x 40-1200 mm
Block: 80-400 x 100-1200 mm
Delivery Condition
EAF+(ESR) or EAF+LF+VD+(ESR), Hot rolled or Forged, Spheroidizing Annealed, Black surface or Machined surface, UT SEP1921 Class3 D/d
Equivalence
AISI / SAE DIN / W.Nr JIS GB
O1 1.2510 SKS3 9CrWMn / CrWMn
Chemical Composition(%)
Steel Grade C Si Mn P S Cr W V
1.2510 0.90-1.05 0.15-0.35 1.00-1.20 ≤ 0.030 ≤ 0.030 0.50-0.70 0.50-0.70 0.05-0.15
O1 0.85-1.00 0.10-0.50 1.00-1.40 ≤ 0.030 ≤ 0.030 0.40-0.70 0.40-0.60 ≤ 0.30
SKS3 0.90-1.00 ≤ 0.35 0.90-1.20 ≤ 0.030 ≤ 0.030 0.50-1.00 0.50-1.00 --
Characteristics

1. A kind of low-alloy cold work tool steel

2. With certain hardenability and wear resistance, homogenous and small particle carbides.

Forging Technique
Heat Temperature Start Forging Temperature Finish Forging Temperature Cooling Method
1150 - 1200 °C 1100 - 1150 °C ≥920 °C Slow cooling
Heat Treatment

Annealing

The recommended annealing practice is to use controlled-atmosphere furnaces. If these are not available, pack-anneal in an inert material. For a quick annealing cycle to develop fair machining properties, heat slowly to 1375 to 1425°F. and cool slowly in the furnace. To develop the lowest hardness and best spheroidization for optimum machinability, heat slowly to 1450°F. and furnace cool at 20 degrees per hour to 900°F. The piece may then be removed from the furnace and cooled in air. Hardness after this cycle will be Brinell 202 max.

 

Stress relieving

When desirable to relieve the strains of machining, heat slowly to 1050°-1250°F, allow to equalize, and then cool in still air (Strain Relieving).The recommended annealing practice is to use controlled-atmosphere furnaces. If these are not available, pack-anneal in an inert material. For a quick annealing cycle to develop fair machining properties, heat slowly to 1375 to 1425°F. and cool slowly in the furnace. To develop the lowest hardness and best spheroidization for optimum machinability, heat slowly to 1450°F. and furnace cool at 20 degrees per hour to 900°F. The piece may then be removed from the furnace and cooled in air. Hardness after this cycle will be Brinell 202 max.

 

Hardening

After thorough prhe hardening furnace, operating from 1450°-1500°F, depending on the size of the part.Warm slightly before charging into the preheat furnace, which should be operating at about 1100°-1200°F.

 

Tempering

O1 is generally tempered in the range of 300°-600°F. Tempering temperatures and resulting Rockwell C hardness, based on a 1 inch round samples oil quenched from 1475°F and tempered for 2 hours, are as follows:



Tempering Temperature °F Rockwell °C
300 65
350 63
400 62.5
450 61
500 60
600 57
Share your thoughts with us today!   Showing 6 of 0 reviews
Most recent
Top Reviews
Read more
Your rating
Your review *
Name *
Enter your Name
Email *
Enter your Email
Sumbit
Contact Us Now
Enter your inquiry details, We will reply you in 24 hours.
Name can't be empty
Name
E-mail can't be empty
Email
Company can't be empty
Company
Phone can't be empty
Phone
Products can't be empty
Products you want
Message can't be empty
Verification code error
code
Refill
Concact Us Now
Tool Steel Manufacturer, Alloy Steel Manufacturer, Die Steel Manufacturer | Ningshing Special Steel
No. 25, Hongxiang Road, A area Industry Hongtang, Jiangbei, Ningbo,315033, China
You can trust us
We are a professional manufacturer, and we are constantly innovating so that our customers can have better products and services.
© 2018 Ningbo Ningshing Special-Steel Group Co., Ltd. RELATED ARTICLES   SiteMap.html SiteMap.xml
Marketing Support by Globalsir