AISI 4140 Alloy Steel | 42CrMo4 | 42CrMoS4 | 1.7225 | SCM440 | 42CrMo

AISI 4140 Alloy Steel | 42CrMo4 | 42CrMoS4 | 1.7225 | SCM440 | 42CrMo
AISI 4140 Alloy Steel | 42CrMo4 | 42CrMoS4 | 1.7225 | SCM440 | 42CrMo
AISI 4140 Alloy Steel | 42CrMo4 | 42CrMoS4 | 1.7225 | SCM440 | 42CrMo
AISI 4140 Alloy Steel | 42CrMo4 | 42CrMoS4 | 1.7225 | SCM440 | 42CrMo

Description

Reviews

AISI 4140 Alloy Steel | 42CrMo4 | 42CrMoS4 | 1.7225 | SCM440 | 42CrMo
Ningshing Special-Steel is the leading stockist of AISI 4140 alloy steel. We have running stock of solid round bars dia.16-300mm, steel plate size of 14-150 x 2000-2300mm. Annealed or Prehardened condition. We can also do furthur machining as per customers' requirement.

AISI/SAE 4140 Alloy Steel is a versatile alloy with good atmospheric corrosion resistance and reasonable strength. It shows good overall combinations of strength, toughness, wear resistance and fatigue strength.

Dimensions
Hot Rolled Round: dia.16-300 mm
Forged Round: dia.150-1200 mm
Cold Drawn Round: dia.6-30 mm
Hot Rolled Plate: 10-150 x 2000-2300 mm
Forged Block: 150-1000 x 200-1900 mm
Delivery Condition

EAF+LF+VD, Hot Rolled or Forged or Cold Drawn, Annealed or Q+T, Black surface or Machined surface, UT SEP1921 Class3 C/c or D/d

Equivalence
AISI / SAE DIN / W.Nr JIS GB
4140 42CrMo4 / 42CrMoS4 / 1.7225 SCM440 42CrMo

Other designations equivalent to AISI 4140 alloy steel are listed in the following table.

AMS 6349 ASTM A193 (B7, B7M) ASTM A506 (4140) ASTM A752 (4140)
AMS 6381 ASTM A194 (7, 7M) ASTM A513 ASTM A829
AMS 6382 ASTM A29 (4140) ASTM A513 (4140) SAE J1397 (4140)
AMS 6390 ASTM A320 (L7, L7M, L7D) ASTM A519 (4140) SAE J404 (4140)
AMS 6395 ASTM A322 (4140) ASTM A646 (4140) SAE J412 (4140)
AMS 6529 ASTM A331 (4140) ASTM A711  
Chemical Composition (%)
Steel Grade C Si Mn P S Cr Mo
42CrMo4
1.7225
0.38-0.45 ≤ 0.40 0.60-0.90 ≤ 0.035 ≤ 0.035 0.90-1.20 0.15-0.30
42CrMoS4 0.38-0.45 ≤ 0.40 0.60-0.90 ≤ 0.035 0.020-0.040 0.90-1.20 0.15-0.30
4140 0.38-0.43 0.15-0.35 0.75-1.00 ≤ 0.035 ≤ 0.040 0.80-1.10 0.15-0.25
SCM440 0.38-0.43 0.15-0.35 0.60-0.85 ≤ 0.035 ≤ 0.040 0.90-1.20 0.15-0.30
42CrMo 0.38-0.45 0.17-0.37 0.50-0.80 ≤ 0.035 ≤ 0.035 0.90-1.20 0.15-0.25
Applications
AISI 4140 Alloy Steel is used for as wide variety of applications where greater toughness and wear resistance is needed over lower carbon grades. Typical applications for 4140 tool steel uses include Components, Adapters, Arbors,strippers, holder blocks, mold bases, ejectors, back up and support tooling, fixtures, jigs, molds, cams, drill collars, Axle Shafts, Bolts, Crankshafts,stubs, couplings, reamer bodies, axles, shafting, piston rods, rams, hydraulic machinery shafts, gears, sprockets, gear racks, chain links, spindles, tool bodies, tool holders, tie rods, Connection Rods, Chuck Bodies, Collets, Conveyor Pins & Rolls, Ejector Pins, Forks, Gears, Guide Rods, Hydraulic Shafts & Parts, Lathe Spindles, Logging Parts, Milling Spindles, Motor Shafts, Nuts, Pinch Bars, Pinions, Pump Shafts,boring bars,tracks, slides, wear strips or parts, forming dies, brake dies, trim dies, bolsters, machinery parts and components, etc.
Mechanical Properties 
Properties Metric Imperial
Tensile strength 655 MPa 95000 psi
Yield strength 415 MPa 60200 psi
Bulk modulus(typical for steel) 140 GPa 20300 ksi
Shear modulus (typical for steel) 80 GPa 11600 ksi
Elastic modulus 190-210 GPa 27557-30458 ksi
Poisson’s ratio 0.27-0.30 0.27-0.30
Elongation at break (in 50 mm) 25.70% 25.70%
Hardness, Brinell 197 197
Hardness, Knoop (converted from Brinell hardness) 219 219
Hardness, Rockwell B (converted from Brinell hardness) 92 92
Hardness, Rockwell C (converted from Brinell hardness. Value below normal HRC range, for comparison purposes only) 13 13
Hardness, Vickers (converted from Brinell hardness) 207 207
Machinability (based on AISI 1212 as 100 machinability) 65 65
Fabrication & Heat Treatment

Machinability
AISI 4140 alloy steel has good machinability in the annealed condition.


Forming

AISI 4140 alloy steel has high ductility. It can be formed using conventional techniques in the annealed condition. It requires more pressure or force for forming because it is tougher than plain carbon steels.


Welding

AISI 4140 alloy steel can be welded using all conventional techniques. However, the mechanical properties of this steel will be affected if it is welded in the heat treated condition, and post weld heat treatment should be performed.


Heat Treament

AISI 4140 alloy steel is heated at 845°C (1550°F) followed by quenching in oil. Before hardening, it can be normalized by heating at 913°C (1675°F) for a long period of time followed by air cooling.


Forging

AISI 4140 alloy steel is forged at 926 to 1205°C (1700 to 2200°F)


Hot Working

AISI 4140 alloy steel can be hot worked at 816 to 1038°C (1500 to 1900°F)


Cold Working

AISI 4140 alloy steel can be cold worked using conventional methods in the annealed condition.


Annealing

AISI 4140 alloy steel is annealed at 872°C (1600°F) followed by slowly cooling in the furnace.


Tempering

AISI 4140 alloy steel can be tempered at 205 to 649°C (400 to 1200°F) depending upon the desired hardness level. The hardness of the steel can be increased if it has lower tempering temperature. For example, tensile strength of 225 ksi cab be achieved by tempering at 316°C (600°F), and a tensile strength of 130 ksi can be achieved by tempering at 538°C (1000°F).


Hardening

AISI 4140 alloy steel can be hardened by cold working, or heating and quenching.

Share your thoughts with us today!   Showing 6 of 0 reviews
Most recent
Top Reviews
Read more
Your rating
Your review *
Name *
Enter your Name
Email *
Enter your Email
Sumbit
Contact Us Now
Enter your inquiry details, We will reply you in 24 hours.
Name can't be empty
Name
E-mail can't be empty
Email
Company can't be empty
Company
Phone can't be empty
Phone
Products can't be empty
Products you want
Message can't be empty
Verification code error
code
Refill
Concact Us Now
Tool Steel Manufacturer, Alloy Steel Manufacturer, Die Steel Manufacturer | Ningshing Special Steel
No. 25, Hongxiang Road, A area Industry Hongtang, Jiangbei, Ningbo,315033, China
You can trust us
We are a professional manufacturer, and we are constantly innovating so that our customers can have better products and services.
© 2018 Ningbo Ningshing Special-Steel Group Co., Ltd. RELATED ARTICLES   SiteMap.html SiteMap.xml
Marketing Support by Globalsir